The hike up to the Mount Hankin Bluffs Viewpoint is a fantastic alternative to hiking the entirety of the Alberni Inlet Trail, which runs just under 30km in three sections. This route utilizes the Inlet Trail to reach arguably its best viewpoint a third of the way up Mount Hankin, and is a fantastic day hike near Port Alberni. The mostly gentle hike follows a combination of trail and some logging road, with several viewpoints along the way, including of Port Alberni and Mount Arrowsmith. From the top, panoramic views stretch up and down the Alberni Inlet, making it possibly one of the best viewpoints near Port Alberni.
Continue reading this blog post for everything you need to know to experience the Mount Hankin Bluffs Viewpoint hike near Port Alberni for yourself, including distance, elevation gain, how to get there, the best time to visit, and lots of photos of my experience.
When hiking it’s important to avoid harmful practices such as disturbing plants or rock-stacking, or removing any natural object from flowers to rocks, as it’s important to leave the environment as natural as possible for the animals and for fellow hikers to enjoy in perpetuity. As many flowers as there are, there are few enough that if we all took one, then there wouldn’t be any left. Take only photos, leave only footprints.
If you haven’t heard of Leave No Trace principles, they’re also really essential to read up on before heading anywhere into the outdoors in general. Following these important principles basically means doing your best to leave beautiful places like the Mount Hankin Bluffs Viewpoint as good (if not better) than you found them, both for their preservation and for the enjoyment of other visitors.
Mount Hankin Bluffs Viewpoint Round Trip Details
Distance: 8.2 KM / 5.1 MI
Elevation Gain: 327 M / 1073 FT
Hiking Time: 3 Hrs
Hiking & Safety Tips
Prepare for the possibility of wildlife encounters. There are almost no grizzly bears on Vancouver Island, but black bears are still common. Bear bells are proven to be an ineffective bear deterrent, and are even actively discouraged by Parks Canada. The best way to let bears know you’re around is simply to use your voice. Make sure to keep a respectful distance from wildlife and never feed the animals. It may seem kind but it doesn’t just kill wildlife and put people in danger, it’s also in many cases illegal.
More tips for hiking in bear country.
Research current trail conditions and make sure you are well-informed about the route before you leave, and assess if it is within your capability. Be aware of what time it gets dark and check the weather forecast. Make sure to tell someone where you’re going and when you expect to return. Every year as more and more people try hiking for the first time, the number of rescues goes up. Being prepared is the best defense.
More information on staying safe in the outdoors.
Pack everything you need for a successful hike, including enough water and energy-rich snacks. Remember to pack out everything you pack in though – don’t expect to find a convenient garbage can halfway up the trail. Bring appropriate layers (remember you’ll warm up once you start hiking) and sun protection. Hiking poles may be helpful but are not required. In addition to not leaving any garbage on the trail yourself, I highly recommend bringing a garbage bag and collecting any trash that you do see on the trail. You’re guaranteed to make the hike up to the Mount Hankin Bluffs Viewpoint a more enjoyable experience for the next person.
How to Get to the Mount Hankin Bluffs Viewpoint Trailhead
The Mount Hankin Bluffs Viewpoint is located along the Alberni Inlet Trail, so while there are a couple of other ways to reach it via nearby logging roads, using the Inlet Trail is my preferred option. The trailhead for the Alberni Inlet Trail is just south of town, about ten minutes away from the highway.
From the Alberni Highway, turn south onto Gertrude Street (two blocks east of the riverfront and the turn north signed for Tofino). Follow Gertrude Street through town as it turns into Stamp Ave and then 3rd Ave. After about seven minutes, right at the edge of town, turn left onto Ship Creek Road. After a couple minutes the large Alberni Inlet Trail parking lot will be visible on the right.
Click here to open the exact trailhead location in Google Maps.
Hiking to the Mount Hankin Bluffs Viewpoint
The start of the Alberni Inlet Trail, and the start of the hike up to the Mount Hankin Bluffs Viewpoint.
The trail initially is fairly flat, and passes through what is actually rather nice forest.
A small bridge passed over what at first appeared to be a gently flowing stream, but under closer inspection was just still water roiling with mosquitoes.
Another small stream crossing.
One criticism of the trail is the lack of signage. There are a couple of side trails splitting off to the left, and it isn’t necessarily obvious which is correct. Keep right.
Starting to head uphill. Almost all of the trail’s elevation gain happens here.
A small viewpoint overlooking Port Alberni. The Beaufort Range stands behind it, with Mt Hal being the highest peak visible from here. The viewpoint overlooks a cutblock, meaning that it won’t exist forever.
Not far past the viewpoint, the trail mostly levels out, with only minor ups and downs.
The trail starts to descend a little bit before reaching a logging road. Turn right onto the logging road.
Continuing along the logging road. Keep left here.
Where the trail resumes is pretty obvious.
Crossing another logging road. The trail continues downhill through the woods.
An important intersection. The trail on the right heads down to the edge of the inlet and follows alongside it, and the trail on the left continues onto the Mount Hankin Bluffs Viewpoint,
Back on another logging road.
The logging road gets progressively more overgrown as it approaches the end.
Another intersection where the trail on the right heads down towards the inlet. Keep left.
It took me a few seconds to notice the trail turns sharply to the left here, as otherwise it seems to completely disappear. It’s pretty overgrown for a minute, but not impossible to follow. This is minutes away from the end of the hike.
A short scramble section, and you’re up on top of the bluffs.
Views from the Mount Hankin Bluffs Viewpoint.
Recommended Hiking Gear
Water is a must whenever I’m hiking, especially if the sun is going to be out. My favourite water filter I’ve used is the Katadyn BeFree 0.6L, which unlike other water filters I’ve used packs up really small and lightweight. For hikes where I know there won’t be any readily available water sources along the way, I make sure to bring my own. The Hydrapak Stow 1L bottle is my go-to, for the same reason that it’s made of a soft plastic that folds up and doesn’t take up any more extra space than necessary in my pack. Finally, Aquatabs are another great option for purifying water, with one tablet being suitable for one litre of water. I previously used the Grayl water filter while travelling internationally, and though I found its hard body more convenient for day to day use and easier to drink from, it has a little too much bulk for my fast-and-light style of hiking.
The secret to all my photos of gorgeous sunset and sunrise mountaintop views? A lot of hiking in the dark. And let me speak from personal experience when I say that the last thing that you want to happen when hiking is to be caught in the dark without a headlamp. I used the Black Diamond Spot 400 for years and it worked great – until I lost it on top of a mountain somewhere. The only downside to it was having to worry about the batteries dying, though there’s also a slightly more expensive version that has a rechargeable battery. Nowadays I’m using the Petzl Actik Core, which is a bit pricier than the more budget-friendly Black Diamond, but is also brighter, more comfortable (in my opinion), and has a hybrid power system that is rechargeable but can also take AAA batteries if needed.
You won’t see me using trekking poles on shorter hikes often – but on long hikes and backpacking trips, as well as certain scrambles, they are an absolute lifesaver. I’ve invested in a high quality ultra-lightweight pair of MSR DynaLock Ascent carbon poles which, while pricey, I don’t regret one bit. If you’re not entirely sure how much use you’re going to get out of a pair of trekking poles, the best budget-friendly option would be the Trekology Trek Z 2.0. Amazon does sell a lot of cheaper Made in China-style trekking poles for cheaper, but these usually are much much heavier and not worth buying.
All the best and most long-lasting cables and power banks I’ve ever owned have been Anker. I once had a phone cable from them that lasted me over three years of daily use! That’s why I keep an Anker PowerCore Essential 20K power bank on me. Like many people I use my phone for a lot of stuff when hiking (checking in with family, using online maps, taking photos, flying my drone) so I like to be prepared for that low battery warning by having a backup power source on me just in case.
The only socks I ever buy for myself are from Darn Tough, and I almost always make sure to wear them when hiking. After years of having no problems only wearing these comfortable and rugged socks for hikes, I accidentally wore a pair of no-name socks on a hike last year and ended up with blisters on both feet. Safe to say I’m back to sticking with the Darn Tough. And the best part? They have a lifetime guarantee, meaning that if they ever wear out you can send them back for a brand new pair. For hiking footwear I go between a pair of lightweight approach shoes for quick and dirty mountain ascents or anything involving scrambling and more heavy-duty boots for longer treks. I’ve worn a couple different versions of the lightweight but super durable Arc’teryx Konseal FL 2 approach shoes for a few years now and am very impressed with the durability. I also really like the thick toecap that keeps me protected every time I stumble into a root or large rock. For longer, tougher, or muddier treks I rely on my LOWA Camino EVO GTX, which I find insanely comfortable and made of very high quality.
I wear my Ar’teryx Gamma Lightweight Pants on every single hike I go on, and on many days when I’m not hiking. After several years of abuse they are still holding together extraordinarily well, with only a few small holes from where I’ve fallen down and some slight stains from being repeatedly coated with mud. They’re lightweight, breathable, and super comfortable. For lightweight and breathable hiking tops I’m a big fan of both the Patagonia Capilene Shirt and the MEC Core Shirt. My Arc’teryx Squamish Hoody shows up in a lot of my photos. It’s super lightweight and packable, and does a great job of cutting the wind while also being pretty breathable. I also have an Arc’teryx Atom Hoody and Arc’teryx Beta LT that I pull out for cooler or wetter conditions.
I hope you enjoyed this guide to hiking to the Mount Hankin Bluffs Viewpoint near Port Alberni! Feel free to leave any questions in the comment section below or to contact me directly via social media.